TZM Sheet

Titanium zirconium molybdenum sheets are widely used in assembles sintered boats and usually as high temperature heating parts and thermal shielding.

TZM SHEET IMAGE

Surface condition: Chinatungsten Online can provide shining, matte or rolling surface of TZM sheet and the surface condition mainly determined by thickness and width and other parameters.

Heat-treating:TZM-blank—inspecting—hot-rolling—annealing—alkali-washing—testing—warm-rolling—inspecting—cool-rolling—leveling—cutting—vacuum annealing—inspecting—packing.

Application: TZM sheet has high strength, well-closed formation and good high-temperature creep and high temperature resistance so it wildly apply in reflecting screen, cover plate of sapphire crystal growing furnace, reflecting screen, heating tape, adapting piece of vacuum furnace and sputtering target material, high temperature resistance boat and other products for ion plating.

To produce high quality TZM sheet the raw material quality is the most important thing. Besides, standardization operation and reasonable producing process is also important for TZM sheet produce. On the other hand, improving TZM sheet surface quality is to well control surface lapping processes’s producing quality and finish degree of top and bottom surface. And then chose advanced double-sided four direction lapping machine so the sheets surface can reach to top level of the world.

Email: sales@chinatungsten.com sales@xiamentungsten.com 

Tel.: +86 592 5129696/86 592 5129595

Fax: +86 592 5129797

TZM Plate

TZM PLATE IMAGE

Titanium zirconium molybdenum plates are widely used in electrode, furnace, vacuum evaporation boat, heat shield and furnace mould and other tool’s parts. Besides, TZM plate is kind of an important raw material for built-up member of electronic industry and industry. To produce TZM plate should put TZM thin plate blank into intermediate frequency furnace after hot rolling, annealing, alkali washing, cool rolling, and cutting and leveling then to make it. After finish all machining operations the TZM plate has shining, smooth surface, what’s more, it has good processing property. Chinatungsten Online not only produce TZM plate, we also produce molybdenum plate, TZM sheet and MoLa alloy plate. Every month we provide 3,000-5,000kg molybdenum plate, but small order can be available. If you want know more about information of our TZM plate you can refer to the specification table as below or visit our website. 

Email: sales@chinatungsten.com sales@xiamentungsten.com 

Tel.: +86 592 5129696/86 592 5129595

Fax: +86 592 5129797

TZM Cube

Titanium zirconium molybdenum cube is kind of hard and tough metal which has silver-grey or gray gloss surface. TZM cube has lots of advantages such as high strength, high toughness, high temperature resistance and corrosion resistance which are widely used as semiconductor components, holder, lead frame and high temperature furnace exothermic material and so on. On the other hand, at present, TZM cube and molybdenum rod are usually used for trim the grinding wheel which are the best raw materials for trim the grinding wheel. Although, TZM cube and molybdenum rod are all can trim the grinding wheel, but the cubes are more suit for trim large grinding wheel which usually called the millwrights. And molybdenum rods are more suit for small grinding wheel. Because using TZM cube to trim can get better result than using other material, what’s more, the high quality and efficiency of TZM cube can improve the production efficiency and quality.

TZM CUBE IMAGE

Email: sales@chinatungsten.com sales@xiamentungsten.com 

Tel.: +86 592 5129696/86 592 5129595

Fax: +86 592 5129797

TZM Tube

Titanium zirconium molybdenum tubes have many advantages such as high melting point, high strength, good thermal conductivity, high temperature resistance and corrosion resistance which are widely used in many fields. For instant, TZM tubes are applied in component tube, heating high temperature furnace, thermocouple-protection tube in high temperature furnace, grid tray and cathode’s support column of high-power evacuated tube, sputtering target material, sapphire single crystal furnace, and high temperature sintered furnace’s strut ting piece and so on.

Divided TZM tube into different types according to producing processes and there are depthdrill TZM tube, sintering TZM tube, welding TZM tube, TZM reelpipe and TZM drawn tube. The sintering TZM tubes are mainly used for large molybdenum tube produce and widely apply in melting equipments, furnace tubes, circular target, and vacuum heating chamber and so on. What’s more the large size of sintering TZM tubes diameter can reach to 1200mm. The welding TZM tubes are usually used in plant section which didn’t strict on size. On the other hand, the welding TZM tubes use vacuum welding so the size can not too large and the diameter of it is 8-500mm. The TZM drawn tube has complicated producing processes and they are suit for produce small size molybdenum tube.

TZM tube image

Email: sales@chinatungsten.com sales@xiamentungsten.com 

Tel.: +86 592 5129696/86 592 5129595

Fax: +86 592 5129797

TZM Bolt

Bolt is kind of conical spiral groove cone or spiral groove cylinder in the surface. According to the different head of bolt can divide them to hexagon head bolt, inner hexagon head bolt, flat screw and so on. Bolt usually can apply in high temperature, high wear and large torque work environment. So the bolt should resist high temperature, wearing, corrosion. Besides, it should has high strength and little thermal deformation, what’s more bolt should has well machinability.

TZM BOLT IMAGE

Titanium zirconium molybdenum (TZM) bolt is produced by powder metallurgy and the purity level is more than 99.95%. At the present, TZM bolt are widely apply in many fields which is because the TZM bolt has many good properties such as high temperature resistance, corrosion resistance, easy proceeding and so on. So TZM bolt usually as a component used in vacuum furnace thermal field, sapphire thermal field and high temperature resistant parts. On the other hand, TZM bolt compare to molybdenum are more easily to process. So Xiamen Chinatungsten Online corp. can according customs require producing TZM bolt. What’s more, TZM raw materials are more inexpensive than molybdenum and other high temperature metal. In the many cases, TZM bolt will use with TZM joint ring and TZM screw.

Email: sales@chinatungsten.com sales@xiamentungsten.com 

Tel.: +86 592 5129696/86 592 5129595

Fax: +86 592 5129797

Titanium Zirconium Molybdenum(TZM Alloy)

What is Titanium Zirconium Molybdenum(TZM Alloy)?

TZM alloy is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM alloy is manufactured by either P/M or Arc Cast technologies and is of great utility due to its high strength/high temperature applications, especially above 2000'F.

TZM alloy has a higher recrystallization temperature, higher strength, hardness and good ductility at room and elevated temperatures than unalloyed Molybdenum. In addition, TZM exhibits good thermal conductivity, low vapor pressure, good corrosion resistance and is machinable.

TZM Molybdenum has a higher recrystallization temperature, higher strength, hardness and good ductility at room and elevated temperatures than unalloyed Molybdenum. TZM offers twice the strength of pure moly at temperatures over 1300'C. The recrystallization temperature of TZM is approximately 250'C higher than moly and it offers better weldability. In addition, TZM exhibits good thermal conductivity, low vapor pressure, and good corrosion resistance and is machinable.

TZM alloy costs approximately 25% more than pure molybdenum and costs only about 5-10% more to machine. For high strength applications such as rocket nozzles, furnace structural components, and forging dies, it can be well worth the cost differential.

TZM plate image

Email: sales@chinatungsten.com sales@xiamentungsten.com 

Tel.: +86 592 5129696/86 592 5129595

Fax: +86 592 5129797